Stainless Steel Gas Liquid Filter, is a special formed knitted wire mesh, which is the main component of wire mesh demister and other separation engineering. Stainless steel filter mesh for gas and liquid serves well in filtering and deleting the particle mixture in foam, liquid and air, by way of distillating, absorbing, evaporating and filtering process in petroleum, chemicals, metallurgy, machine, pharmaceuticals, automobile and environmental protection.
1. Material: stainless steel wire AISI201, 202,301,302,304,304 L, 321,316,316 L, galvanized wire, redrawing wire, brass wire .
2. Specification:
Wire diameter: 0.10 ~ 0.55mm flat wire or round wire. Common diameter is 0.20mm-0.25mm .
Hole size: from the (2 × 3 mm) to the (4 × 5mm) then (12 × 6mm)
Width: 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400,500 mm, 600mm, etc.
3. There are three types vapor liquid filter as follow:
Standard type 40-100 60-150 105-300 140-400 160-400 200-570mm
Efficient type 60-100 80-100 80-150 90-150 150-300 200-400 300-600mm
High-penetration type 20-100 30-150 70-400 100-600 170-560mm
Damped 33-30 38-40 20-40 26-40 30-40 30-50 48-50 30-60 30-80 50-120mm
| Typical wire diameter(mm) | Range of natural width(mm) |
|
| 0.2-0.35 | 30-100 | |
Typical number of stitches
|
Tyoical number of stitches
| |
| 0.6 | 1.9 |
Coarse mesh | ||
| Typical wire diameter(mm) | Range of natural width (mm) |
|
| 0.2-0.35 | 30-550 | |
Typical number of stitches per cm om lengeh | Typical number of stitches per cm across lasy flat | |
| 1.6 | 0.74 | |
| Super-coarse mesh | ||
| Typical wire diameter (mm) | Range of natural width (mm) |
|
| 0.2-0.35 | 30-550 | |
Typical number of stitches per cm om lengeh | Typical number of stitches per cm across lasy flat | |
| 0.5 | 0.5 | |
4.Application: It mainly used for processing demister, for separating gases inside the droplet, also be extrusion molding, for manufacturing a filtration device, in the automotive industry, the electronics industry has also been widely used.
